If necessary, reposition the vehicle with the other side closely aligned to a curb, driveway, or parking stall lines, and repeat the alignment process.
The red or orange section of the guidance lines should be aligned with the rear of your vehicle. The guidance lines should appear directly on top of your reference points. Drag the circles on the corners of the guidance lines until they match the angle and position of the curb, driveway, or parking stall lines.From the camera view, select > Adjust Video.The curb, driveway, or parking stall lines should be clearly visible on the device. This allows you to use the parking stall lines in the rear of the vehicle as reference points for alignment. You may want to position the vehicle in the center of a parking stall, and then pull forward into the next stall. Position the vehicle with one side closely aligned to a curb, driveway, or parking stall lines.You should align the guidance lines separately for each backup camera. You should not use the guidance lines feature if you have not aligned the guidance lines.įor best reference points, the guidance lines should be aligned to reflect the outside edges of the vehicle. To provide the most accurate reference, you must align the guidance lines for each backup camera. Guidance lines provide an approximate visual representation of the vehicle’s path when in reverse. You are responsible for maintaining awareness of your surroundings. The guidance lines feature is intended for informational and reference purposes only. After you complete the pairing process with a camera for the first time, it connects automatically to the Garmin navigation device when power is applied. Follow the on-screen instructions to finish pairing and setting up the camera.From the apps menu, select Tools > Wireless Camera > BC 50.Select Settings > Wireless Camera > Add New Camera > BC 50.
Garmin backup camera install manual#
See your navigation device owner’s manual for more information. NOTE: The location of the camera app may vary by device model. For more information about updating the device software, see the owner’s manual for your navigation device. Your device may not support the BC 50 camera without the latest software.
Garmin backup camera install update#
Update your navigation device to the latest software.Go to /BC50 for more information about device compatibility. You can pair the BC 50 camera with a compatible Garmin navigation device. Pairing a BC 50 Camera with a Garmin Navigation Device The video feed from the next camera appears, and the camera name appears at the top of the screen. You can cycle through the video feeds from all paired cameras. The camera video is dismissed automatically after 2 minutes and 30 seconds, whether or not your vehicle has moved forward. When you place the vehicle into drive, the camera automatically stops sending video, and the navigation device returns to normal operation. For more information, see the Voice Command app or the Voice Control app on your navigation device, or the navigation device owner’s manual. This feature is not available for all languages or may require additional navigation device setup for some languages. The voice commands may vary based on your navigation device model.
NOTE: Voice commands are not available on all navigation devices.
If your camera is connected to constant power, select.If your camera is connected to a reverse lamp (recommended), place the vehicle into reverse.After you pair your camera with a compatible Garmin® navigation device, the camera view appears automatically when you turn on your navigation device, and you can manually enable the camera view at any time.
0 kommentar(er)
